HOW TO: USING THE NEW PORTAL
1. Movie
2. Slides
3. Scroll
HOW TO: USING THE PREVIOUS PORTAL
- Movie
2. Slides
3. Scroll
"Schedules" do nothing on their own. They are a collection of days/times. A "Schedule" set to an "Access Group" creates an "Allowed to Unlock". This guide will demonstrate how to push a new or modified schedule to your Vertx controllers.
1. Click "Access Control Settings".
2. Click "Schedule(s)".
3. See the KB article "How to Modify an Access Group Schedule" if you need to make any changes to the schedule before pushing.
4. Click on the "Controller:" drop-down.
5. Go to the 2nd tab: "Schedule Settings" and click the "Schedule:" drop-down.
6. Select the applicable schedule.
7. Select the applicable controller.
8. Click "Push All Holidays/Schedules To Controller".
9. Repeat for all applicable controllers.
10. Now to the "Reader(s)". Click "Reader(s)".
11. Click the "Reader" drop-down and select the reader.
12. Click on the "Controller" drop-down.
13. Select the applicable controller.
14. Click "Push All Readers To Controller".
15. Repeat for all applicable controllers.
16. Next is "Reader Group(s)".
17. Click the "Reader Group:" drop-down.
18. Select the applicable "Reader Group".
19. Click on the "Select Controller" drop-down.
20. Click on the applicable controller.
21. Click "Push All Reader Groups To Controller".
22. Repeat for all applicable controllers.
23. Next is "Access Group(s)".
24. Click on the "Access Group:" drop-down.
25. Click on the first applicable "Access Group".
26. Click "Push All Access Groups To Controllers".
27. Repeat for all applicable controllers.
28. Next is "Access Credential(s)".
29. Click "Select all rows of the table" to select all.
30. Click here to select all controllers.
31. Click "All Controllers".
32. Click the drop-down for "Bulk Actions".
33. Click "Push Credential(s)".
34. Click "Yes".
35. Click "close button".
"Schedules" do nothing on their own. They are a collection of days/times. A "Schedule" set to an "Access Group" creates an "Allowed to Unlock". This guide will demonstrate how to push a new or modified schedule to your Vertx controllers.
1. Click "Access Control Settings".
2. Click "Schedule(s)".
3. See the KB article "How to Modify an Access Group Schedule" if you need to make any changes to the schedule before pushing.
4. Select the "Schedule".
5. Click "Sync with Controllers".
6. Click the dropdown to "--Select the Controller--".
7. Select the applicable controller.
8. Select "Sync Now".
9. Repeat for all applicable controllers.
10. Now to the "Reader(s)". Click "Reader(s)".
11. Under Reader Settings, click the "--Interface-- " dropdown.
12. Click on the applicable interface.
13. Select the applicable.
14. Click "Sync with Controllers".
15. Repeat for all applicable readers.
16. Next is "Reader Group(s)".
17. Select the applicable "Reader Group".
18. Click "Sync with Controllers".
19. Click the dropdown to select the applicable controller.
20. Click "Sync Now".
21. Repeat for all applicable controllers.
22. Next is "Access Group(s)". Click on "Access Group(s)".
23. Click on the "Access Group:" drop-down.
24. Click on the first applicable "Access Group".
25. Click "Sync with Controllers".
26. Repeat for all applicable controllers.
27. Next is "Access Credential(s)".
28. Click "Select all rows of the table" to select all.
29. Under "Bulk Actions", select "All Controllers" and "Push Credential(s)".
30. Click "Confirm".
31. Click the "X" to close.
Comments
0 comments
Article is closed for comments.